<progress id="5x7nt"></progress>
<rp id="5x7nt"></rp>

    <listing id="5x7nt"></listing>

        <p id="5x7nt"></p>
        
        

        <big id="5x7nt"></big>

          <thead id="5x7nt"></thead>

          咨詢熱線
          當前位置: 首頁 > 新聞中心 > 行業新聞 >

          車庫門添加潤滑油我們該如何進行做?

          發布人:http://www.bj-dcpj.com    發布時間:2021-09-08 13:46:40

          買一瓶鋰基潤滑脂或車庫門潤滑油。不要用類似WD-40的通用潤滑油,潤滑車庫門需要用鋰基潤滑脂。一般在五金店或者淘寶都能買到。當然也有一些專門用來潤滑車庫門的潤滑油。不能用機油。相對于車庫門潤滑油,機油更容易招灰,并且容易滴落。在使用前,先閱讀使用說明,看產品是否適合用在車庫門上。
          Buy a bottle of lithium grease or garage door oil. Do not use general lubricating oil similar to WD-40. Lithium base grease is required to lubricate garage doors. You can usually buy it in a hardware store or Taobao. Of course, there are some lubricants specially used to lubricate garage doors. Do not use oil. Compared with garage door lubricating oil, the oil is easier to attract dust and drip. Before use, read the instructions to see if the product is suitable for use on the garage door.
          打開車庫門,然后在每個鉸鏈上都噴上潤滑油。輕輕地用手提起車庫門,然后在和導軌有接觸的鉸鏈上噴上潤滑油。這樣做可以潤滑門上的活動部件,讓開門和關門更加順暢。在每個鉸鏈上噴1-2次,讓每一面都噴上潤滑油。
          Open the garage door and spray lubricating oil on each hinge. Gently lift the garage door by hand, and then spray lubricating oil on the hinge in contact with the guide rail. This can lubricate the moving parts on the door and make the door open and close more smoothly. Spray 1-2 times on each hinge and spray lubricating oil on each side.
          濟南車庫門
          潤滑滾輪。滾輪是車庫門上的活動部件,它固定在鉸鏈上。這些滾輪里面是小的滾珠軸承,只有將它們充分潤滑后,開關門的時候才會順暢。在噴霧罐出口插上細管,然后把潤滑油噴到滾輪里面。把流出來的潤滑油擦干凈,否則車庫門會不穩。每個看得見的滾珠軸承都要噴上潤滑油,注意尼龍滾輪上不需要噴潤滑油。
          Lubricate the rollers. The roller is a movable part on the garage door, which is fixed on the hinge. Inside these rollers are small ball bearings. Only after they are fully lubricated can they open and close the door smoothly. Insert a thin tube at the outlet of the spray tank and spray the lubricating oil into the roller. Wipe off the lubricating oil, or the garage door will be unstable. Each visible ball bearing shall be sprayed with lubricating oil. Note that lubricating oil does not need to be sprayed on the nylon roller.
          在彈簧和軸承板上也噴上潤滑油。彈簧一般位于車庫門的頂部,也需要充分潤滑。軸承板是彈簧兩側可以活動的圓形部件。在彈簧上噴上潤滑油,然后在軸承板的區域也噴上潤滑油。之后嘗試開門和關門操作,讓潤滑油涂抹得更均勻。如果彈簧壞掉或者彎曲變形,在潤滑前更好換根新彈簧。
          The spring and bearing plate are also sprayed with lubricating oil. The spring is usually located on the top of the garage door and also needs to be fully lubricated. The bearing plate is a circular part that can be moved on both sides of the spring. Spray lubricating oil on the spring and then on the central area of the bearing plate. Then try to open and close the door to make the lubricating oil more evenly applied. If the spring is broken or bent, it is best to replace it with a new spring before lubrication.
          潛在成本:如果你要升級你的門來增加窗戶,改造現有的車庫門成本很高,而且你有可能在這個過程中對你的門造成損害。你需要確定更新車庫門是否會使它們不平衡。因為當你增加窗戶時,門的重量會改變。
          Potential cost: if you want to upgrade your door to add windows, it is expensive to transform the existing garage door, and you may damage your door in the process. You need to determine whether updating garage doors will make them unbalanced. Because when you add windows, the weight of the door changes.
          給軌道頂部噴上潤滑油。軌道是鏈條滑行地方,會沿著屋頂延伸。軌道頂部是鏈條滑行時真正接觸到的地方,所以也需要噴潤滑油。給軌道頂部噴上潤滑油,然后用抹布抹勻。鏈條上帶有天然保護劑,所以無需定期潤滑。軌道底部不用噴潤滑油。
          Spray the top of the rail with lubricating oil. The track is where the chain slides and extends along the roof. The top of the track is where the chain really touches when sliding, so it also needs to be sprayed with lubricating oil. Spray lubricating oil on the top of the track, and then wipe it evenly with a rag. There is a natural protective agent on the chain, so there is no need for regular lubrication. There is no need to spray lubricating oil at the bottom of the track.
          上一篇:提高車庫門的裝配精度的要素是什么?
          下一篇:車庫門滾輪組件的改進優勢有哪些?
          產品中心
          聯系我們