<progress id="5x7nt"></progress>
<rp id="5x7nt"></rp>

    <listing id="5x7nt"></listing>

        <p id="5x7nt"></p>
        
        

        <big id="5x7nt"></big>

          <thead id="5x7nt"></thead>

          咨詢熱線
          當前位置: 首頁 > 新聞中心 > 行業新聞 >

          快速門控制系統在安裝時要注意什么?

          發布人:http://www.bj-dcpj.com    發布時間:2021-11-10 15:33:01

          (1)當安裝控制系統的時候,必須處于斷電狀態,沒有電流通過。
          (1) When installing the control system, it must be in the power-off state without current.
          (2)控制系統在安裝之前檢查外觀和內部電子元件是否在運輸過程中造成損壞,否則可能在調試或者使用的時候,對使用者造成重大傷害。
          (2) Before installation, the control system shall check whether the appearance and internal electronic components are damaged during transportation, otherwise it may cause serious injury to the user during commissioning or use.
          (3)非專業人員,不要去觸摸控制板上的電子元件,尤其是處理器芯片部分,否則人體的靜電會造成線路板上的電子元件永久性損壞。
          (3) Non professionals should not touch the electronic components on the control board, especially the processor chip, otherwise the static electricity of the human body will cause permanent damage to the electronic components on the circuit board.
          (4)在施工過程中產生的電線屑、小螺絲、鉆孔渣等金屬物體不要讓其進入控制箱內,否則可能會導致電路短路的可能。
          (4) Wire scraps, small screws, drilling slag and other metal objects generated during construction shall not be allowed to enter the control box, otherwise it may lead to the possibility of circuit short circuit.
          (5)在安裝控制箱過程中,不要對控制箱進行任何的鉆孔、切割、打磨等機械加工。
          (5) During the installation of the control box, do not carry out any drilling, cutting, grinding and other mechanical processing on the control box.
          (6)未被使用的接線口必須密封好,確??刂葡到y的防護等級為IP54.
          (6) Unused wiring ports must be sealed to ensure that the protection grade of the control system is IP54
          (7)電線管不能外露或者有負載以及被拉伸的情況。
          (7) The conduit shall not be exposed, loaded or stretched.
          (8)控制箱不能被嵌入墻內或者緊貼墻壁安裝,否則回影響系統的散熱。
          (8) The control box cannot be embedded in the wall or installed close to the wall, otherwise it will affect the heat dissipation of the system.
          濟南車庫門
          快速門工程質量控制管理的要點探析
          Key points of quality control and management of fast door project
          總所周知,快速門的施工質量好壞不僅會影響客戶使用體驗,同時還會涉及到一個安全問題,直接影響到業主的經濟效益和社會效益。為了保障使用者的安全以及提高企業的核心競爭力,必須對快速門的質量控制管理嚴格。
          As we all know, the construction quality of the fast door will not only affect the customer experience, but also involve a safety problem, which will directly affect the economic and social benefits of the owner. In order to ensure the safety of users and improve the core competitiveness of enterprises, we must strictly control the quality of fast doors.
          一、加強快速門生產質量的管理的必要性:
          1、 The necessity of strengthening the production quality management of fast doors:
          一方面,快速門的生產質量是使用者進行生產與利潤的重要保障,直接關系到工人的生命財產,因此,在生產制作快速門的過程中,必須不斷強化質量控制管理,保證建筑工程的質量。只有不斷加強工業門質量控制管理,才能在激烈的行業競爭中站得住腳,才能順利實現發展與盈利的目標。
          On the one hand, the production quality of fast doors is an important guarantee for users to produce and profit, which is directly related to workers' lives and property. Therefore, in the process of producing fast doors, we must constantly strengthen quality control management to ensure the quality of construction projects. Only by continuously strengthening the quality control and management of industrial doors can we stand in the fierce industry competition and successfully achieve the goal of development and profitability.
          二、快速門質量控制的管理與要點分析
          2、 Management and key points analysis of quality control of fast door
          1、建立完善的工程質量管理制度;
          1. Establish a perfect project quality management system;
          2、加強產品原材料質量管控;
          2. Strengthen the quality control of raw materials;
          3、安裝過程的質量控制;
          3. Quality control during installation;
          4、增強全體生產人員質量意識!
          4. Enhance the quality awareness of all production personnel!
          上一篇:寒冷地區車庫門應該怎么保養?
          下一篇:最后一頁
          產品中心
          聯系我們